img
search
search for
Yes
Cancel
language
中国
韩国
韩国
韩国
韩国
韩国

How is the embossing roller of the customized Embossing calender material made

  • Categories:News
  • Author:
  • Origin:
  • Time of issue:2022-08-03 08:00
  • Views:

(Summary description)After the pattern is completed, the surface of the roller body of the customized Embossing calender material can be plated with a hard chrome layer or sprayed with other materials (depending on the purpose of the embossing roller).

How is the embossing roller of the customized Embossing calender material made

(Summary description)After the pattern is completed, the surface of the roller body of the customized Embossing calender material can be plated with a hard chrome layer or sprayed with other materials (depending on the purpose of the embossing roller).

  • Categories:News
  • Author:
  • Origin:
  • Time of issue:2022-08-03 08:00
  • Views:
Information

1. Blanking: the roll body of the customized Embossing calender material is made of seamless steel pipe, the shaft head is made of round steel and flanges at both ends.
2. Turning: turning the joint surface of the matching parts of the roller body, end plate and shaft head, etc.

customized Embossing calender material
3. Welding processing: If there are structures such as oil or water passing through the roller body of the customized Embossing calender, the inner tube must be welded in advance. When the inner tube of the roller is welded, the coaxiality of the two ends of the shaft and the inner sleeve should be corrected, only the inner end plate on the shaft head is welded. Put the inner sleeve of the customized Embossing calender material into the roller body, and weld the mating junction between the inner end plate and the roller body. Install the outer end plate on the shafts at both ends, and weld the junction between the outer end plate and the joint surface of the shaft and the roller body.
4. The roll blank of the customized Embossing calender material is annealed to eliminate internal stress.
5. For the flat end face of the steel roller shaft, drill a standard center hole.​​
6. Turning processing: All parts of the roller body should be processed after the size is determined.
7. Process patterns on the surface of the roller. This is a very important part of the production process of the embossing roller of the customized Embossing calender material. It is required that the staff must be serious, careful and meticulous in the production process in order to produce embossing with clear patterns, rich layers and strong three-dimensional sense. Flower roll.
8. After the pattern is completed, the surface of the roller body of the customized Embossing calender material can be plated with a hard chrome layer or sprayed with other materials (depending on the purpose of the embossing roller).

Keyword:

Products
CN
Mobile Access

Mobile Access

Company Address: No. 68, Heping Road, High-tech Zone, Mianyang City, Sichuan Province

customer service hotline:0816-2536111 Mobile:+86 13336186669/+86 13608121660

©MIANYANG TOC AUTO-EQUIPMENT CO., LTD.蜀ICP备2021003198号-1

300.cn chengdu

©MIANYANG TOC AUTO-EQUIPMENT CO., LTD. 蜀ICP备2021003198号-1

300.cn chengdu