img
search
search for
Yes
Cancel
language
中国
韩国
韩国
韩国
韩国
韩国

What are the working processes of a high-quality waste paper pulper?

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2022-03-12 14:34
  • Views:

(Summary description)The raw materials of the high-quality waste paper pulper enter the pulper for crushing, and the pulp that meets the size is pumped to the pulp tank through the sieve plate under the rotor. The size of the sieve plate is generally 10-14mm.

What are the working processes of a high-quality waste paper pulper?

(Summary description)The raw materials of the high-quality waste paper pulper enter the pulper for crushing, and the pulp that meets the size is pumped to the pulp tank through the sieve plate under the rotor. The size of the sieve plate is generally 10-14mm.

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2022-03-12 14:34
  • Views:
Information

  High-quality waste paper pulper working process

  A. The raw materials of the high-quality waste paper pulper enter the pulper for crushing, and the pulp that meets the size is pumped to the pulp tank through the sieve plate under the rotor. The size of the sieve plate is generally 10-14mm.

quality waste paper pulper

  B. The light slag and heavy slag enter the slag well through the slag tank of the tank body. The heavy slag is grabbed with a grab bucket and removed after passing through the slag washing tank. The slag tank is connected with a hydraulic slag cleaner, and the light slag is discharged through the hydraulic slag cleaner. The light slag discharged by the hydraulic slag cleaner is removed by the cylindrical screen, and the heavy slag produced is returned to the sediment tank.

  C. A high-quality waste paper pulper is installed with a rope winch next to the pulper. A cable is put into the pulper through the rope winch, and the bar-shaped debris such as iron wire, packing line, and plastic sheet in the pulper will be removed. In the rotation of the material, it is tightly wound on the cable, and the twisted rope is drawn out from the pulper through the rope winch, and the twisted rope is cut into small pieces with a twisted rope cutter for processing.

  Low-consistency rotor of high-quality waste paper pulper: through the high-strength turbulence and shearing action of hydraulic power, it strengthens the disintegration of waste paper and provides stirring effect. Through the rotation of the rotor, the waste paper is crushed between the sieve plate and the rotor, which further promotes the disintegration and fine grinding of the slurry. Therefore, the rotor gap should be adjusted well. Generally, the gap between the rotor and the sieve plate wear strip is 0.5-1.5mm. The rotor blades need to be inlaid with wear-resistant materials, and the rotor replacement cycle is generally 2-3 months.

  High-quality waste paper pulper sieve plate: the sieve hole is generally round, and the diameter of the sieve hole is generally 10-14mm. Separated from the brown stock. This is the initial purification process of the slurry, so that the subsequent equipment such as coarse screen and slag remover can be protected from the impact and wear of coarse and heavy impurities.

  High-quality waste paper pulper rope winch and rope cutter: installed on the edge of the pulper to insert new rope and pull out new rope. The hydraulic cutter cuts the twisted rope into small pieces for easy handling.

Keyword:

Products
CN
Mobile Access

Mobile Access

Company Address: No. 68, Heping Road, High-tech Zone, Mianyang City, Sichuan Province

customer service hotline:0816-2536111 Mobile:+86 13336186669/+86 13608121660

©MIANYANG TOC AUTO-EQUIPMENT CO., LTD.蜀ICP备2021003198号-1

300.cn chengdu

©MIANYANG TOC AUTO-EQUIPMENT CO., LTD. 蜀ICP备2021003198号-1

300.cn chengdu