The dynamic maintenance of the china Coreboard paper products refers to the maintenance of the machine in a state of motion. The dynamic maintenance of the machine is quite important. The main contents of its dynamic maintenance are:
1. Machine readiness detection. The preparation stage of the china Coreboard paper can be detected by jogging or turning, such as whether there are tools and other items stuck in the machine; whether the printing plate installation position is suitable, whether the blanket installation of the china Coreboard paper is suitable, if not, then It may cause machine failure, or even damage the machine in severe cases.2. The lubrication state of the machine. First of all, you can observe whether the oil circuit of the machine is smooth through the oil mark. If there is no oil on the oil mark or the oil mark is not clearly visible, you should stop in an emergency and carefully check whether there is oil leakage in the oil circuit. For china Coreboard paper products machines that use sliding bearings, low speed is not conducive to its lubrication, especially jogging or low-speed operation has a greater impact on its lubrication. Therefore, before performing such operations, it is recommended to idle the machine for oil lubrication.
3. Shock during machine operation. The smaller the impact of the china Coreboard paper products machine during operation, the more beneficial it is to use, and it can also prolong the service life of the machine. On the premise of ensuring product quality, the pressure and the moment of inertia of the china Coreboard paper machine should be reduced, and the machine speed should be reduced.